Products
Showing 57–84 of 143 results
FT Green Groove 123 PVC Free Recyclable – Keder
FT Green Groove 123 PVC Free is a specially formulated, PVC-free keder for Silicone Edge Graphic fabric applications. It is manufactured to match typical silicone properties in elasticity and hardness. It is offered with a lubricated finish for automated sewing equipment. It also has relatively high heat resistance and a low coefficient of friction for high speed sewing applications without additional cooling. It is supplied on a corrugated spool, 167 yards/roll. The material used to produce FT Green Groove keder is formulated to be environmentally friendly and as such is fully recyclable and PVC-free. Custom sizes are available upon request.
Width: 12mm x 3mm Weight: na Construction: PVC-free, Specially formulated Flame Retardancy: N/A Suggested Applications: Accessories, Ceiling Covering, Display Frame Systems, Light Boxes, Popup Display Systems
FT Groove 4477 Silicone – Keder
FT Groove 4477 Silicone is a 100% Silicone keder for Silicone Edge Graphic fabric applications. It is stitched onto the edge of printed fabrics and ensures the textile can be clamped into the aluminum profile and stretch into the frame. It is supplied on plastic spool, 110 yards/roll and available in sizes: 12 X 3mm and 14 X 3mm. Custom sizes are available upon request.
Width: 12mm x 3mm, 14mm x 3mm Weight: na Construction: 100% Silicone Flame Retardancy: N/A Suggested Applications: Accessories, Ceiling Covering, Display Frame Systems, Light Boxes, Popup Display Systems
FT Groove 4545 PVC Clear – Keder
FT Groove 4545 PVC Clear is a 100% PVC keder for Silicone Edge Graphic fabric applications that offers an economical price point. FT Groove is stitched onto the edge of printed fabrics and ensures the textile can be clamped into the aluminum profile and stretch into the frame. It is supplied on plastic spool and available in sizes: 12 X 3mm and 14 X 3mm. Rolls are 220 yards.
Width: 12mm x 3mm, 14mm x 3mm Weight: na Construction: 100% PVC Flame Retardancy: N/A Suggested Applications: Accessories, Ceiling Covering, Display Frame Systems, Light Boxes, Popup Display Systems
GF 1010 Element® – Dye Sublimation Printable
GF 1010 Element® is 100% Polyester and is bright white and very sturdy. It an excellent outdoor banner fabric, has a DWR treatment, and is a less expensive alternative to Sunbrella. It has been tested for several water proof tests including Impact Penetration, AATCC 42-2007: 2.81 grams of weight gain; Water Repellency, AATCC 70-2010: 29.19% water absorbed; Water Repellency, AATCC 22-2010 (Spray): 100 – No sticking or wetting. Click the button below to request a sample of GF1010 Element®.
Width: 125" Weight: 8.0 oz/yd2 (271 g/m2) Construction: Woven Filament Flame Retardancy: Not FR Suggested Applications: Awnings, Banners - Outdoor Street Pole, Duffel bags, Tote Bags
GF 1480 Poplin – Dye Sublimation Printable
GF 1480 Poplin is 100% Polyester. This product offers an excellent print surface with very vibrant color schemes. Click the button below to request a sample of GF1480 Poplin.
Width: 124" Weight: 4.4 oz/yd2 (148 g/m2) Construction: Woven Flame Retardancy: NFPA 701 Suggested Applications: Banners - Indoors, Exhibit Graphics, Retail Displays, Table Covers
GF 1701 Primary Flag – Dye Sublimation Printable
GF 1701 Primary Flag is 100% Polyester and is excellent for feather flags and outdoor street pole banners. Click the button below to request a sample of GF1701 Primary Flag.
Width: 126" Weight: 3.4 oz/yd2 (114 g/m2) Construction: Knit Flame Retardancy: NFPA 701 Title 19 DIN 4102 Suggested Applications: Flags, Outdoor Banners, Retail Displays
GF 1707 Soft Knit – Dye Sublimation Printable
GF 1707 Soft Knit is 100% Polyester. This wrinkle resistant fabric has great definition and presents a very high quality print. It is an alternative to our popular GF 4017 Soft Knit fabric. Click the button below to request a sample of GF1707 Soft Knit.
Width: 126" Weight: 5.1 oz/yd2 (172 g/m2) Construction: Warp Knit Flame Retardancy: German B-1 DIN 4102-1, NFPA 701, Title 19 Suggested Applications: Banners - Indoor, Exhibit Graphics, Home Furnishings, Photographic Back Drops, Retail Displays, Silicone Edge Graphics, Table Covers
GF 1707 Soft Knit Black – Non-printable Liner for Light Blocking
GF 1707 Soft Knit Black is 100% Polyester. Made with no-bleed yarns that are 100% colorfast and won’t bleed or fade when washed. It is an excellent liner for double sided banner applications or trade show exhibits. Under ASTM E84, it meets Class A, Flame Spread Index 25 or less and Smoke Developed Index 450 or less. Click the button below to request a sample of GF1707 Soft Knit Black.
Width: 126" Weight: 5.1 oz/yd2 (172 g/m2) Construction: Warp Knit Flame Retardancy: Class A, NFPA 701, Title 19 Suggested Applications: Light Blocking Liner
GF 1708 Heavy Knit – Dye Sublimation Printable
GF 1708 Heavy Knit is 100% Polyester and an alternative to GF4480 Heavy Knit, one of our most popular fabrics. It is wrinkle resistant and moderately opaque. Click the button below to request a sample of GF1708 Heavy Knit.
Width: 126" Weight: 6.8 oz/yd2 (230 g/m2) Construction: Warp Knit Flame Retardancy: German B-1, NFPA 701, Title 19 Suggested Applications: Banners - Indoor, Exhibit Graphics, Home Furnishings, Photographic Back Drops, Retail Displays, Roll Up Banner Stands, Silicone Edge Graphics
GF 1708 Heavy Knit Black – Non-printable Liner for Light Blocking
GF 1708 Heavy Knit Black is 100% Polyester. Made with no-bleed yarns that are 100% colorfast and won’t bleed or fade when washed. It is an excellent liner for double sided banner applications or trade show exhibits. Click the button below to request a sample of GF1708 Heavy Knit Black.
Width: 126" Weight: 6.8 oz/yd2 (230 g/m2) Construction: Warp Knit Flame Retardancy: NFPA 701 Suggested Applications: Light Blocking Liner
GF 1710 Poly Stretch – Dye Sublimation Printable
GF 1710 Poly Stretch is 89.5% Polyester, 10.5% Spandex. It has stretch in both directions. It gives a decent amount of opacity and great definition on all colors. Click the button below to request a sample of GF1710 Poly Stretch.
Width: 126" Weight: 8.3 oz/yd2 (280 g/m2) Construction: Warp Knit Flame Retardancy: German B-1, NFPA 701 Suggested Applications: Exhibit Graphics, Geometric/Stretch Displays, Photographic Back Drops, Silicone Edge Graphics, Tension Displays
GF 1808 Perfect Knit – Dye Sublimation Printable
GF 1808 Perfect Knit is 100% Polyester and an alternative to GF1708 Heavy Knit, one of our most popular fabrics. It is wrinkle resistant and moderately opaque. Click the button below to request a sample of GF1808 Perfect Knit.
Width: 126" Weight: 6.8 oz/yd2 (230 g/m2) Construction: Warp Knit Flame Retardancy: NFPA 701, Title 19 Suggested Applications: Banners - Indoor, Exhibit Graphics, Home Furnishings, Photographic Back Drops, Retail Displays, Roll Up Banner Stands, Silicone Edge Graphics
GF 1850 Rebound® Ultra Lite – Dye Sublimation Printable
GF 1850 Rebound® Ultra Lite is our anti-skid backed printable carpet fabric, engineered for Dye Sublimation. Rebound® is a textured-pile carpet with a needle punch nonwoven face and a black basket weave backing. Applications include short-term carpet for corporate and promotional eventing, trade show floor graphics, POP displays for retail advertising, bar mats and floor mats. This product is FR and meets 16 CFR Part 1630, “Standard for the Surface Flammability of Carpets and Rugs (FF 1-70)”, which is required by The Consumer Product Safety Commission for carpet materials. Click the button below to request a sample of GF1850 Rebound®.
**This style is typically put up on 30-yard rolls with a 4-inch core, we can rewind on 3-inch core upon request.
Width: 126", 28" Weight: 35 oz/yd2 (1178 g/m2) Construction: Non Woven Flame Retardancy: 16 CFR Part 1630 and 16 CFR Part 1631 Suggested Applications: Exhibit Graphics, Flooring/Mats
GF 2000 Rebound® – Dye Sublimation Printable
GF 2000 Rebound® is our anti-skid backed printable carpet fabric, engineered for Dye Sublimation. Rebound® is a textured-pile carpet with a needle punch nonwoven face and a 16 ounce washable grey basket weave backing. Applications include short-term carpet for corporate and promotional eventing, trade show floor graphics, POP displays for retail advertising, bar mats and floor mats. This product is FR and meets 16 CFR Part 1630, “Standard for the Surface Flammability of Carpets and Rugs (FF 1-70)”, which is required by The Consumer Product Safety Commission for carpet materials. Click the button below to request a sample of GF2000 Rebound®.
**This style is typically put up on 30-yard rolls with a 4-inch core, we can rewind on 3-inch core upon request.
Width: 126", 63" Weight: 42 oz/yd2 (1413 g/m2) Construction: Non Woven Flame Retardancy: 16 CFR Part 1630 Suggested Applications: Cornhole Board Mats, Exhibit Graphics, Flooring/Mats
GF 2240 Miami – Dye Sublimation Printable
GF 2240 Miami is 94.7% Polyester, 6.3% Spandex and presents a polished look for upscale signage while also maintaining a soft hand. Excellent for soft signage, high end displays and retail advertising applications. Click the button below to request a sample of GF2240 Miami.
Width: 126" Weight: 6.3 oz/yd2 (212 g/m2) Construction: Knit Flame Retardancy: German B-1 DIN 4102-1, NFPA 701 Suggested Applications: Banners - Indoor, Exhibit Graphics, Home Furnishings, Retail Displays, Silicone Edge Graphics, Table Covers
GF 2328 Satin – Dye Sublimation Printable
GF 2328 Satin is 100% Polyester. It is a high sheen satin that is light weight and presents a very high quality print. It is excellent for elegant type applications. Click the button below to request a sample of GF2328 Satin.
Width: 124" Weight: 3.8 oz/yd2 (128 g/m2) Construction: Woven Satin Flame Retardancy: Not FR Suggested Applications: Banners - Indoors, Exhibit Graphics, Retail Displays, Table Covers
GF 2400 Big Floor – UV-Curable and Solvent Printable
GF 2400 Big Floor is our anti-skid backed printable flooring material, engineered for Solvent printers. It is 85% PVC, 15% Polyester. Applications include short-term carpet for corporate and promotional eventing, trade show floor graphics, POP displays for retail advertising, and floor mats. This product is FR and meets 16 CFR Part 1630, “Standard for the Surface Flammability of Carpets and Rugs (FF 1-70)”, which is required by The Consumer Product Safety Commission for carpet materials. Applications include cornhole board mats, exhibit graphics and temporary flooring/mats. This product was previously named UV 2400. Click the button below to request a sample of GF2400 Big Floor.
Width: 126", 194.8", 68" Weight: 29.7 oz/yd2 (1000 g/m2) Construction: Woven Flame Retardancy: 16 CFR Part 1630; EN 13501-1: Bfl-s1 Suggested Applications: Cornhole Board Mats, Exhibit Graphics, Flooring/Mats
GF 3030 Fencing – Dye Sublimation Printable
GF 3030 Fencing is 100% Polyester. This thin, open fabric was created specifically for short-term construction barriers, eventing and sports marketing markets. Small holes in the fabric allow for some see through and there is adequate space for printed colors and images. It has an open area of 15-20%. Click the button below to request a sample of GF3030 Fencing.
Width: 126" Weight: 3.0 oz/yd2 (110 g/m2) Construction: Mesh Flame Retardancy: NFPA 701 Suggested Applications: Barrier Fencing, Construction Barriers, Flags, Sports Marketing, Temporary Eventing Fencing
GF 33 Prime Backlit – Dye Sublimation Printable
GF 33 Prime Backlit is a game changer in the backlit SEG realm and is made from 100% stretch poly yarns, it gives intense color, a radiant glow and features excellent stretch-and-recovery for easy shipping and a quick install in aluminum framing systems. Other notable features are its outstanding durability and tear strength for long lasting use. It is registered in the State of California (CSFM Registration Number: F-101467) and meets Section 13115 of the California Health and Safety Code. It meets B1 (DIN 4102-1). Winner of the PRINTING United Alliance 2020 Product of the Year Award for Textile-Media-Framing Systems (Backlit). Click the button below to request a sample of GF33 Prime Backlit.
Width: 125" Weight: 5.6 oz/yd2 (190 g/m2) Construction: 100% Stretch Polyester Flame Retardancy: CSFM F-101467, German B-1 DIN 4102-1, NFPA-701, Title 19 Suggested Applications: Backlit, Exhibit Graphics, Retail Displays, Silicone Edge Graphics
GF 4010 Black – Liner Only
GF 4010 Black is the recommended replacement for GF4018 Black. It is 100% Polyester and is an excellent liner in double sided banner applications or trade show exhibits. Made with no-bleed yarns that are 100% colorfast and won’t fade when washed. Under ASTM E84, it meets Class A, Flame Spread Index 25 or less and Smoke Developed Index 450 or less. Click the button below to request a sample of GF4010 Black.
Width: 126" Weight: 5.3 oz/yd2 (180 g/m2) Construction: Warp Knit Flame Retardancy: Class A, NFPA 701 Suggested Applications: Light Blocking
GF 4010 Soft Knit – Dye Sublimation Printable
GF 4010 Soft Knit is 100% Polyester and is commonly referred to as Celtic Cloth. This wrinkle resistant fabric has great definition and presents a very high-quality print. It is an alternative to our popular GF 4017 Soft Knit fabric. Under ASTM E84, it meets Class A, Flame Spread Index 25 or less and Smoke Developed Index 450 or less. Click the button below to request a sample of GF4010 Soft Knit.
Width: 126" Weight: 5.2 oz/yd2 (175 g/m2) Construction: Warp Knit Flame Retardancy: Class A, NFPA 701, Title 19 Suggested Applications: Banners - Indoor, Exhibit Graphics, Home Furnishings, Photographic Back Drops, Retail Displays, Silicone Edge Graphics, Table Covers
GF 4017 Soft Knit – Dye Sublimation Printable
GF 4017 Soft Knit is 100% Polyester and is commonly referred to as Celtic Cloth. This wrinkle resistant fabric has great definition and presents a very high-quality print. It is an alternative to our popular GF 4417 Soft Knit fabric. It is registered in the State of California (CSFM Registration Number: F-002601) and meets Section 13115 of the California Health and Safety Code. Under ASTM E84 (UL 723), it meets Class A, Flame Spread Index 25 or less and Smoke Developed Index 450 or less. Click the button below to request a sample of GF4017 Soft Knit.
Width: 125", 63" Weight: 5.1 oz/yd2 (172 g/m2) Construction: Warp Knit Flame Retardancy: B-s1-d0, Class A, CSFM F-002601, NFPA 701, Title 19 Suggested Applications: Architectural, Banners - Indoor, Exhibit Graphics, Home Furnishings, Photographic Back Drops, Retail Displays, Silicone Edge Graphics, Table Covers
GF 4019 Nirvana B.O.B.® – UV-Curable and Dye Sublimation Printable
GF 4019 Nirvana B.O.B.® is our award-winning black back fabric for soft signage displays. The standout feature of this soft knit fabric is the coated back, which provides a built-in liner for finished applications, and promotes cost savings in material and labor. It has a bright white face and adequate stretch for proper fit in framing systems. It is registered in the State of California (CSFM Registration Number: F-100542) and meets Section 13115 of the California Health and Safety Code. Winner of SGIA’s 2018 Product of the Year Award for Media – Textile – Banner. This product was previously named UV 4019. Click the button below to request a sample of GF4019 Nirvana B.O.B.®.
Width: 126" Weight: 7.7 oz/yd2 (260 g/m2) Construction: 42.31% PA, 57.69% Polyester Flame Retardancy: CSFM:100542, German B-1 DIN 4102-1, NFPA 701, Title 19 Suggested Applications: Banners - Indoor, Exhibit Graphics, Retail Displays, Roll Up Banner Stands, Silicone Edge Graphics
GF 4020 Nirvana Purity® – Dye Sublimation Printable
GF 4020 Nirvana Purity® is a breakthrough soft signage fabric with a pigment coated white-back for complete opacity, giving a two-in-one solution for Dye Sub and UV prints with a built-in liner. Nirvana Purity® is especially advantageous in double sided SEG applications where one side is intended for backlit and the other frontlit. The opacity of the coated back encloses and reflects the light within the frame to illuminate backlit graphics to a greater extent than other lined SEG fabrics. Winner of SGIA’s 2019 Product of the Year Award for Textile-Media-Banner and Textile-Media-Framing Systems (Frontlit). This product was previously named UV 4020. Click the button below to request a sample of GF4020 Nirvana Purity®.
Width: 126" Weight: 9.5 oz/yd2 (320 g/m2) Construction: Warp Knit Flame Retardancy: NFPA 701; Title 19; German B-1 DIN 4102-1 Suggested Applications: Banners - Indoor and Outdoor, Canopy Tents, Exhibit Graphics, Retail Displays, Silicone Edge Graphics
GF 4022 Nirvana Purity Shine® – Dye Sublimation and UV Printable
GF 4022 Nirvana Purity Shine® is a breakthrough shiny soft signage fabric with a pigment coated white-back for complete opacity, giving a two-in-one solution for Dye Sub and UV prints with a built-in liner. Nirvana Purity Shine is especially advantageous in double sided SEG applications where one side is intended for backlit and the other frontlit. The opacity of the coated back encloses and reflects the light within the frame to illuminate backlit graphics to a greater extent than other lined SEG fabrics. This product was previously named This product was previously named UV 4022. Click the button below to request a sample of GF4022 Nirvana Purity Shine®.
Width: 126" Weight: 9.5 oz/yd2 (320 g/m2) Construction: Warp Knit Flame Retardancy: NFPA 701; German B-1 DIN 4102-1 Suggested Applications: Banners - Indoor and Outdoor, Exhibit Graphics, Retail Displays, Silicone Edge Graphics
GF 4030 Nirvana Plus – UV and Dye Sublimation Printable
GF 4030 Nirvana Plus is an enhanced printable soft signage black back fabric developed to significantly decrease smoke exhaustion during the transfer process. It has 30% more fabric on the face than other printable black-back media. The additional fabric increases vibrancy of printed colors and absorbs heat during transfer. This premium product gives a two-in-one solution for printable fabric with a built-in liner and a finished back, providing cost savings in material and labor. It is ideal for hanging banners and retractable banner stands. Other uses include frontlit SEG and pillowcase fabric displays with no liner. Winner of PRINTING United Alliance’s 2022 Pinnacle Product Award for Textile-Media-Banner. Click the button below to request a sample of GF4030 Nirvana Plus.
Width: 126" Weight: 7.8 oz/yd2 (265 g/m2) Construction: 30.8% PA, 69.2% Polyester Flame Retardancy: NFPA 701; Title 19 Suggested Applications: Banners - Indoor, Exhibit Graphics, Retail Displays, Roll Up Banner Stands, Silicone Edge Graphics
GF 4080 Heavy Knit – Dye Sublimation Printable
GF 4080 Heavy Knit is 100% polyester and an alternative to GF4480 Heavy Knit, one of our most popular fabrics. It is wrinkle resistant and moderately opaque. Under ASTM E 84 (UL 723) it meets Class A, Flame Spread Index 25 or less and Smoke Developed Index 450 or less. Click the button below to request a sample of GF4080 Heavy Knit.
Width: 125" Weight: 8.56 oz/yd2 (288 g/m2) Construction: Warp Knit Flame Retardancy: Class A, NFPA 701, Title 19 Suggested Applications: Apparel, Architectural, Banners - Indoor, Exhibit Graphics, Home Furnishings, Photographic Back Drops, Retail Displays, Roll Up Banner Stands, Silicone Edge Graphics
GF 4201 Flag – Dye Sublimation Printable
GF 4201 Flag is 100% Polyester. It has an open area of 36%. Combined with UV resistant or dispersed inks, it makes an excellent outdoor banner fabric. Click the button below to request a sample of GF4201 Flag.
Width: 126", 60" Weight: 3.9 oz/yd2 (131 g/m2) Construction: Warp Knit 3 bar Flame Retardancy: New York Bulletin 44, NFPA 701, Title 19 Suggested Applications: Banners - Outdoor Street Pole, Feather Flags
Showing 57–84 of 143 results